Yamaha CRW2200SX - Manual (Page 32)

23
Troubleshooting
Please refer also to the YAMAHA CD-R/RW Drive web site for more information.
YAMAHA CD-R/RW Drive web site
URL: http://www.yamaha.co.jp/english/product/computer/
Europe
URL: http://www.yamaha-it.de/
The drive does not turn on.
● Are the AC adapter and the power cable connected correctly?
Make sure that the CRW2200SX drive is properly connected to the AC outlet
using the included AC adapter and power cable. (→P. 16)
● Make sure that the rear panel power switch is set to ON. As long as the LED on
the front panel lights up or blinks in green or orange, the drive is successfully
turned on. The problem may not be with the hardware (→P. 26). If the LED
doesn’t light up or blink, consult your nearest Yamaha dealer for repair.
The computer does not start up.
● Is the SCSI card installed correctly?
Please read the documentation that came with the SCSI card for details.
The CRW2200SX drive is not recognized.
● Is the drive’s power cable attached correctly, and does the drive turn on? Also, is
the SCSI cable connected correctly?
If the system has started up normally, you will be able to see the CRW2200SX
drive and SCSI card listed in Control Panel | System | Device Manager tab. The
drive will be listed as “YAMAHA CRW2200S” when you double-click on
“CDROM,” and the SCSI card will be listed when you double-click on “SCSI
controllers.” (→P. 18)
When you turn on the computer, you can access the machine’s hardware SCSI
BIOS settings before Windows is loaded. You can set the computer to recognize
the SCSI card and the CRW2200SX drive in the BIOS.
Note
Generally, the BIOS (Basic Input / Output System) is a small program that resides on a ROM
chip on the computer’s motherboard as well as on some expansion cards. It checks the system
and its devices (such as serial ports and hard disk controllers) before loading the operating
system (OS).