4XEM Network Camera - Manual (Page 34)

- 30 -
Definitions in Configuration
Only the Administrator can access system configuration. Each category in the left
column will be explained in the following pages. The bold texts are the specific
phrases on the Option pages. The Administrator may type the URL below the figure to
directly enter the frame page of configuration. If the Administrator also wants to set
certain options through the URL, read the reference appendix for details.
<url> http://<Network Camera>/setup/config.html
<Network Camera> is the domain name or original IP address of the Network
Camera.
<url> http://<Network Camera>/setup/system.vspx
<Network Camera> is the domain name or original IP address of the Network
Camera.