4XEM Network Camera - Manual (Page 74)

- 70 -
Save Directly save the adjust image
parameters
Group: Motion
NAME VALUE DESCRIPTION
0 disable motion detection enabled
(r/w)
1 enable motion detection
0 disable motion window #1 winenabled_<1~3
>
(r/w)
1 enable motion window #1
winname_<1~3>
(r/w) <text string shorter
than 14 characters > name of motion window #1
<blank>
winleft_<1~3>
(r/w) 0 ~ 352 for CCD
0 ~ 320 for CMOS Left coordinate of window position.
<0>
wintop_<1~3>
(r/w) 0 ~ 288 for PAL
0 ~ 240 for
NTSC & CMOS Top coordinate of window position.
<0>
winwidth_<1~3>
(r/w) 0 ~ 352 for CCD
0 ~ 320 for CMOS Width of motion detection window.
<0>
winheight_<1~3>
(r/w) 0 ~ 288 for PAL
0 ~ 240 for
NTSC & CMOS Height of motion detection window.
<0>
winobjsize_<1~3>
(r/w) 0 ~ 100 Percent of motion detection window
<0>
winsensitivity_<1~
3>
(r/w) 0 ~ 100 Sensitivity of motion detection
window
<0>
update
(w) 1 Update the above motion detection
settings to take effect
Group: DDNS
NAME VALUE DESCRIPTION
enable
(r/w) 0, 1 Enable or disable the dynamic dns.
<0>