4XEM Network Camera - Manual (Page 9)

- 5 -
Consult with the dealer of the peripherals for correct installation.
1 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC)
2 SW_COMMON OUTPUT (open from SW_OPEN at initial state)
(close with SW_OPEN when set DO to ON)
3 DI+ INPUT (Max. 50mA, 12VDC)
4 DI- INPUT (Initial state of DI is low)
Mount the Camera
1. Use the supplied wrench to remove the dome cover