4XEM Network Camera - Manual (Page 78)

- 74 -
dihigh 0/1 Enable/Disable trigger when input is high
dilow 0/1 Enable/Disable trigger when input is low
dirise 0/1 Enable/Disable trigger when input is rising
difall 0/1 Enable/Disable trigger when input is falling
motion1 0/1 Enable/Disable trigger when motion int window
#1 is detected
motion2 0/1 Enable/Disable trigger when motion int window
#2 is detected
motion3 0/1 Enable/Disable trigger when motion int window
#3 is detected
ioalarm 0/1 Enable/Disable DO trigger when DI condition
matched
mdalarm 0/1 Enable/Disable DO trigger when motion
detection condition matched
ioupload 0/1 Enable/Disable upload snapshot when DI
condition matched
mdupload 0/1 Enable/Disable upload snapshot when motion
detection condition matched
seqop 0/1 Enable/Disable sequential operation
sinter 1 ~ 99999 Interval of sequential snapshot in second
mail Send snapshot by e-mail smethod
ftp Send snapshot by ftp
suffix 0/1 Enable/Disable FTP put snapshots with date and
time suffix
resetdo 0/1 Reset/No reset DO when click save button
Example: Enable sequential send snapshot by every 1 second with email.
http://myserver/setup/app.vspx?method=set&exclude=1&eventop=0&seqop=1&
smethod=mail&sinter=1