8e6 Technologies ER3-100 (5K02-55) - Manual (Page 12)

8 8
e
6 e
nterprise
r
eporter
Q
uick
s
tart
G
uide
F. Return the loosened inner rail to its upright po-
sition and insert the bezel pin into the bottom
hole of the U-shaped handle.
G. Slide the inner rail forward beneath the clips to
lock it in place.
H. Screw the inner rail back on the chassis.
I. After it is installed, the bezel should drop down
when it is gently tugged forward and down-
ward. The bezel should remain upright when
raised up and closed.