3Com iCV-01a - Manual (Page 20)

Chapter 3: Web Interface
This section allows the user to define hotspots, required patrol boundary, and
see where the current camera position.
Fig.15 WebCAM Patrol Setting / Controls
User
defined
Pan Tilt
boundary
Maximum boundary (x,y)
of the Pan Tilt camera Click to select which
camera to control. User defined
hot spot bubble.
Current
camera
position
and view
area.
Show ful
Pan Tilt
range.
HotSpot Settings
This part shows the hotspot coordinates and the Administrator can give each
location a name. Click and hold on the Hotspot bubble in the above patrol
control to re-define the coordinates.
Enter a
name for
the selected
hotspot
Patrol Setting
Enter a
name for
the selected
hotspot
Boundary
This defines the camera patrol boundary. Click and hold on either one of the
two boundary bubble to redefine the boundary.
Auto Patrolling
Select Yes to start auto patrolling function.
Select No to stop the patrolling function.
Format
Choose from 5 different patrolling formats;
a. Oscillating – The camera will pan and tilt at the same time within the user
defined boundary. Camera will oscillate from left to right and back.
WebCAM - user manual -17-