3Com iCV-01a User Manual
Page 58
Advertising
Chapter 5: Using the Utility Program
2.3 IP Configuration
This section allows you to configure the IP address for WebCAM. You do not have
to edit this section if you have gone thru Setup Wizard earlier.
Select the Unit and then
click IP Configuration.
Select the WebCAM unit on the right display screen, and click IP Configuration.
This will bring up the following configuration window.
2.3.1 IP Address
Use this section to configure the IP Address of WebCAM.
Fig.58 IP Configuration: IP Address
WebCAM - user manual
-55-
Advertising