3Com iCV-01a - Manual (Page 35)

Chapter 3: Web Interface
Loop from … to …
This will determine the number of files in the sequence. Once the last file
number is reached, it’ll loop and replace the first file in the sequence with the
most current image.
Digits …
This will determine the number of digits assignable for the above sequence.
The Administrator can choose to assign between 1 to 6 digits.
Click for an example.
Send Email
Select Yes to send an email when motion is detected.
Note:
The image size received by email / FTP depends on the resolution set in Basic
Settings
Camera Settings Image Size
Fig.32 Motion Detect Email Notification
Email Server: …
The Email server will be shown here. If not, click Edit to go to the Email / FTP
configuration page. Click on Motion Detection to return here. (See Section
2.4.4 on Email / FTP configuration)
Email Address Book
The available Email addresses are listed here. See Section 2.4.4 on how to
add an Email address to the Address Book.
Recipient
The Administrator can determine who will receive email notification.
To add a recipient to the list, click <
To add all the recipients to the list, click <<
WebCAM - user manual -32-