3Com iCV-01a - Manual (Page 89)

Appendix A: Router Configuration
Dell (http://www.dell.com)
TrueMobile 2300 Wireless Broadband Router
1. Log into your router using your router IP.
2. On the main page, click on Advanced Settings at the top of the page.
3. Go to the Port Forwarding section and select Custom Port Forwarding Settings.
4. Check the Enable box.
5. Enter the desired name or description in the Service Name field such as WebCAM
Web.
6. In the Incoming Ports field, specify port 80 in both boxes.
7. In the Destination IP Address field, enter the IP address of WebCAM
8. In the Destination MAC Address field, enter the MAC address of WebCAM. You
can find the camera’s MAC address by either looking at the MAC address sticker on
the bottom of the camera or by utilizing setup utility to display the MAC address.
WebCAM - user manual -86-