4XEM IPCAMW45 - Manual (Page 17)

- 13 -
www.4XEM.com
Build a Security Application
The Administrator can use the built-in motion detection to monitor any movement and perform
many useful security applications. To upload the snapshots, users can choose either email or
FTP according to user’s needs. Both e-mail and FTP use the network settings on the Email and
FTP page.
1. Click on Configuration on homepage,
2. Click on Motion detection at the left column,
3. Check Enable motion detection,
4. Click on new to have a new window to monitor video,
5. Type in a name to identify the new window,
6. Use the mouse to click, hold, and drag the window corner to resize or the title bar to move,
7. Fine-tune using the Sensitivity and Percentage fields to best suit the camera’s
environment. Higher Sensitivity detects the slighter motion. Higher Percentage
discriminates smaller objects,
8. Clicking on Save enables the activity display. Green means the motion in the window is
under the watermark set by Administrator and red means it is over the watermark,
9. Click on Application at the left column,
10.Check the weekdays as you need and give the time interval to monitor the motion detection
every day,
11.Select the Trigger on Motion detection.
12.Set the delay before detecting next motion to avoid continuous false alarms following
the original event,
13.Set the number of pre-event and post-event images to be uploaded,
14.Check the window name set in step 5,
15.Check the way to upload snapshot.
16.Click on save to validate.