4XEM IPCAMW45 - Manual (Page 18)

- 14 -
www.4XEM.com
Software Revision Upgrade
Customers can obtain the up-to-date software from the web site of 4XEM. An easy-to-use
Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade
function is opened to the Administrator only. To upgrade the system, follow the procedures
below.
1. Download the firmware file from www.4xem.com.
2. Run the Upgrade Wizard and proceed following the prompts. Refer to the instructions of the
Upgrade Wizard for details.
3. Or upgrade firmware from HTTP web page directly
3. The whole process will finish in a few minutes and it will automatically restart the system.
If power fails during the writing process of Flash memory, the program in the
memory of the Network Camera may be destroyed permanently. If the Network
Camera cannot restart properly, call 4XEM Technical Support.