Digital output – 4XEM IPCAMW45 User Manual

Page 33

Advertising
background image

- 29 -

www.4XEM.com

Trigger

Digital input:

The Network Camera will send video clip file when the digital input is triggered.

*Note: Please configure Motion Detection first: There are three windows for motion
detection and each needs to be defined. Select the windows which need to be monitored. If
motion detection has not been set up, undefined will be shown instead of the window title. If
this happens, the window can be defined by clicking on

Motion detection

and a note will show

to direct the user to the configuration page for motion detection setup.

Delay second(s) before detecting next event:

Set the time delay before restarting to

check on the triggering condition when the current condition is triggered.

Sequential:

Video clip interval: second(s):

The Network Camera will send the video clip file

at the specified intervals to the external server using the method selected below. Remember:
This operation is still subject to the conditions set in the weekly schedule.


Send Videoclip By

Email:

This selects the uploading method following the intervals set above. The snapshot

named “prefix-yyyymmdd-hhmmss.jpg” will be attached in the email.

FTP:

The snapshots will be uploaded to the external FTP server with the file name defined in

the next option. This can also be used to refresh the captured images stored in the external
web server to build creative homepages.

FTP put snapshots with date and time suffix:

This option sets up the snapshot capture

date and time, which can be used to easily differentiate the snapshot file names in the
sequential operation. For instance, “prefix-20030102-030405.jpg” means the JPEG image was
captured in the year 2003, January the 2

nd

, at 3 o’clock, 4 minute, and 5 second. If this suffix

is omitted, the file named “video.jpg” on the external FTP server will be refreshed at the
specified interval.



Advertising