Digital output – 4XEM IPCAMW45 User Manual

Page 34

Advertising
background image

- 30 -

www.4XEM.com

Digital Output

Digital Output

Enable digital output:

Enable/Disable digital output
application.

Weekly Schedule

Sun – Sat:

Select the days of

the week to perform the
application.

Time
Select

Always

or input the

time interval.

Trigger

Digital input:

The Network Camera will send video clip file when the digital input is triggered.

*Note: Please configure Motion Detection first: There are three windows for motion
detection and each needs to be defined. Select the windows which need to be monitored. If
motion detection has not been set up, undefined will be shown instead of the window title. If
this happens, the window can be defined by clicking on

Motion detection

and a note will show

to direct the user to the configuration page for motion detection setup.

Delay second(s) before detecting next event:

Set the time delay before restarting to

check on the triggering condition when the current condition is triggered.

Advertising