2Wire 1000SW - Manual (Page 17)

13
If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of choice
to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for
detailed configuration instructions.
Check your connections
With your computer completely started and your wireless card properly configured, verify the POWER and
HOME NETWORK indicator lights on the front of the HomePortal are green. If they are not, see “Diagnosing
connection problems” on page 21. The BROADBAND LINK indicator light will not turn green until the
HomePortal software has been installed and an Internet connection has been established.
Continue to Step 3 “Install the HomePortal Software” on page 14.