2Wire 1000SW - Manual (Page 49)

45
1. Right-click the Wireless Network Connection
icon, located in the systray.
2. Select View Available Wireless Networks .
3. The Connect to Wireless Network screen
appears. In the
Available networks field, select
your wireless access point. The wireless access
point displays as “
2WIRE” in all capital letters,
followed by the last three digits of the
HomePortal serial number (located on the
bottom of your HomePortal).
4. In the Network key field, enter your ten-digit
Wireless Encryption Key, located on the bottom
of your HomePortal.
5. Click Connect .
6. A notification message now appears next to the
Wireless Network Connection icon indicating
that your wireless adapter is connected to your
network.