2Wire 1000SW - Manual (Page 42)

38
6. To identify your network, click Next . The Edit
Configuration screen appears.
7. In the Network Name field, enter the word
“
2WIRE ” followed by the last three digits of
your HomePortal serial number, located on the
bottom of your HomePortal. This is the
Wireless Network Name. The Wireless
Network Name is case-sensitive, so it is
important that you enter the word “
2WIRE ” in
capital letters.
8. Click Next . In the Set Security field, check the
Enable Data Security checkbox. Verify that the
Use Hexadecimal (0-9, a-f, A-F) radio button is
selected.
9. In the Key field, enter your ten-digit Wireless
Encryption Key, located on the bottom of your
HomePortal.
10. Verify that Key 1 is selected in the Encrypt data
with pull-down menu (this is the default).
11. To select a power management option, click
Next . The following screen appears.
12. Select the power management option that you
wish to use (the default is
Off ), and click Next .