3Com WL-542 - Manual (Page 30)

28 C HAPTER 4: R UNNING THE S ETUP W IZARD
PPPoE Mode
Figure 15 PPPoE Screen
To set up the router for use with a PPP over Ethernet (PPPoE) connection,
use the following procedure:
1 Enter your PPP over Ethernet user name in the Username text box.
2 Enter your PPP over Ethernet password in the Password text box.
3 Re-type your PPP over Ethernet password in the Retype Password text
box.
4 Enter your VPI and VCI information in the VPI/VCI text boxes.
5 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down list. This information will have been provided to you by your
ISP.
6 Check all of your settings, and then click Next. The Wireless Settings
screen is displayed.