3Com WL-542 - Manual (Page 47)

Wireless Settings 45
Wireless WDS Settings
The Router supports WDS (Wireless Distribution System). WDS enables
one or more Access Points to rebroadcast received signals to extend
range and reach, though this can affect the overall throughput of data.
Figure 36 Wireless WDS Settings Screen
To enable wireless repeating:
1 Check the Enable WDS check box.
2 Enter the MAC address(es) of one or more access points in the AP MAC
Address table.
3 Click Apply.
To refresh the list of available access points, click Rescan Wireless
Networking.