3Com WL-542 - Manual (Page 58)

56 C HAPTER 5: C ONFIGURING THE R OUTER
Figure 44 DNS Screen
If the DNS information is automatically provided by your ISP every time
you connect to it, check the Automatic from ISP box.
If your ISP provided you with specific DNS addresses to use, enter them
into the appropriate fields on this screen and click Apply.
Many ISPs do not require you to enter this information into the Router. If
you are using a Static IP connection type, you may need to enter a
specific DNS address and secondary DNS address for your connection to
work properly. If your connection type is Dynamic, PPPoA or PPPoE, it is
likely that you do not have to enter a DNS address.
Hostname & MAC To configure the Hostname and MAC Address information for your
Router, select Internet Settings, then from the sub-menu select Hostname
& MAC. The Hostname and MAC Address screen displays.
Figure 45 Hostname and MAC Address Screen