3Com WL-542 - Manual (Page 81)

System Tools 79
a checkmark in the box next to Enable Daylight Saving. The system clock
may not update immediately. Allow at least 15 minutes for the router to
contact the time servers on the Internet and get a response. You cannot
set the clock yourself.
You can specify which SNTP servers the Router will use to update it’s
system clock, although doing this should only be necessary if you are
experiencing difficulty.
Syslog Server Using third party syslog software, this Syslog Server tool will automatically
download the Router log to the specified server IP address.
Figure 69 Syslog Server Screen
1 Check Enable to use this function.
2 Enter the server IP address in the Server LAN IP Address field.