3Com WL-542 - Manual (Page 39)

LAN Setup 37
LAN Settings The LAN Settings screen is used to specify the LAN IP address of your
Router, and to configure the DHCP server.
Figure 27 LAN Settings Screen
1 Select LAN Settings and then specify the Router IP Address and Subnet
Mask in the appropriate fields. The default IP address of the Router is
192.168.1.1.
2 If you want to use the Router as a DHCP Server, click in the On check
option.
3 If you need to, you can change the range of addresses given out by the
Router by changing the IP Pool Start Address and IP Pool End Address
fields.
4 Specify the DHCP Lease time by selecting the required value from the
Lease Time drop down list. The lease time is the length of time the DHCP
server will reserve the IP address for each computer
5 Specify the Local Domain Name for your network.
This step is optional.
6 Check all of your settings, and then click Apply.