Disabling and resetting stp, Disabling and resetting stp 7-14 – 3Com 3800 User Manual
Page 112
7-14
C
HAPTER
7: S
PANNING
T
REE
P
ROTOCOL
(STP)
Disabling and
Resetting STP
To disable STP or return STP settings to their defaults, use the
commands listed in Table 7-2.
CAUTION: If you ignore warnings and delete an STPD without
removing all of its VLAN members first, those VLANs will also be
deleted.
Table 7-2 STP Disable and Reset Commands
Command
Description
delete stpd <stpd_name>
Allows you to remove an STPD. An STPD can only be
removed if all VLANs have been deleted from it.
disable stpd [<stpd_name> | all]
Allows you to disable the STP mechanism on one or all
STPDs.
disable stpd port <portlist>
Allows you to disable STP on one or more ports.
unconfig stpd {<stpd_name> | all}
Allows you to restore default STP values to one or all
STPDs.
SW3800.BK Page 14 Tuesday, May 5, 1998 5:20 PM