Festool LS 130 EQDUPLEX - Manual (Page 8)

8
- sanding profi led workpieces of natural wood
- sanding of thinly applied primer
- smoothing primed wooden surfaces.
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and
doors
- interim paint sanding on edges
- rubbing down stained surfaces with sanding vlies
1 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with sand-
ing felt
- sanding stained edges
7 Accessories, tools
Festool offers the appropriate accessories, sanding
and polishing attachments for every application.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
“www.festool.com”.
8 Maintenance and care
Always remove the power supply plug from
the socket before carrying out any work on
the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festool.com/Service
EKAT
1
2 3 5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.
9 Environment
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach