Festool CTM 48 E-LE-AC B22 CLEANTEX - Manual (Page 14)

14
CTM 48 E LE EC/B22, CTL 48 E LE EC/B22 GB
4 Intended use
The mobile dust extractor is suitable for the
extraction of dry, combustible dust from ma-
chines and equipment in Zone 22 in accor-
dance with IEC 60335-2-69.
CTM 48 E LE EC/B22The mobile dust ex-
tractor is designed for extracting hazardous
dusts with limit values up to 0.1 mg/m³ and
wood dust from dust class 'M' in accordance
with IEC 60335-2-69.
CTL 48 E LE EC/B22The mobile dust ex-
tractor is designed for extracting hazardous
dust with limit values up to 1 mg/m³ and
wood dust from class 'L' in accordance with
IEC 60335-2-69.
The mobile dust extractor is designed to ex-
tract water
as well as for heavy-duty applications and in-
dustrial use in accordance with IEC 60335-1
and IEC 60335-2-69.
The mobile dust extractor is not suitable for
extracting dust that poses a risk of explosion
(e.g. explosives), flammable liquids and mix-
tures of combustible dust and flammable liq-
uids.
The mobile dust extractor is not suitable for
equipment that generates sources of igni-
tion.
The user bears the responsibility for
damage and accidents caused by im-
proper use.
5 Safety instructions
5.1 General safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The device is not intended for use by per-
sons (including children) with limited phys-
ical, sensory or mental ability or without
sufficient experience and/or knowledge,
unless they are supervised by a person re-
sponsible for their safety or have been in-
structed on how to use the device. Children
should always be supervised to ensure that
they do not play with the device.
– Prior to use, operating personnel must re-
ceive information and instructions on how
to use the device and handle any materials
involved as well as relevant training, in-
cluding safe procedures for disposing of
the extracted materials.
– Observe all the applicable safety regula-
tions relating to handling materials.
– Warning: the machine may contain haz-
ardous dust. Only authorised and qualified
personnel with suitable protective equip-
ment may perform maintenance work, in-
cluding emptying the container and
changing the filter. Do not operate the ma-
chine without a fully fitted filter system.
– When extracting hazardous dust or large
quantities of oak or beech dust, only use
the machine in combination with a single
electric or pneumatic tool.
– Risk of explosion and fire hazard: Also
observe any other restrictions relating to
dust with an ignition energy of less than
1 mJ specified by the labour authorities.
Do not extract sparks or hot dust, flamma-
ble or explosive fluids (e.g. petrol, thin-
ner), aggressive fluids/solids (e.g. acid,
leach, solvent). This mobile dust extractor
is suitable for extracting paint dust.
– Do not damage the mains power cable
(e.g. by driving over, dragging, etc.). Pro-
tect from heat, oil and sharp edges. Do not
pull the plug from the socket by the cable.
– Check the plug and the cable regularly and
have them replaced by an authorised ser-
vice workshop should either become dam-
[1-4] Connection for energy box
[1-5] Handle
[1-6] SysDoc
[1-7] Handle SB-CT (accessory)
[1-8] Hose diameter setting
[1-9] Switch
[1-10] Suction power adjuster
[1-11] Appliance socket with automatic on/
off function
[1-12] Locking clip
[1-13] Dust container
[1-15] Brake