Edimax Technology ER-1088 - Manual (Page 66)

Once you have added your VPN Policy to the Mesh Group, you can set up your Mesh Group
through the VPN Mesh Group Configuration.
Figure 6-5: Mesh Group Configuration
Settings –Mesh Group Configuration
Aggregation Group This will display all the VPN connections that are using for VPN load
balancing. You should enable the check box before you make a VPN load
balance connection.
• Delete Button – This button can delete one or all IPSec Policies.
• Set Button – Once you have enabled/disabled the check box, you
have to press the Set button to submit it.
• Edit Button – The Edit button will let you edit the IPSec policy.
• View Button – This will let you monitor the connection status.
• Connection Button – Allows you connect or disconnect the VPN
manually,
Page 62