Edimax Technology ER-1088 - Manual (Page 70)

Settings – QoS Policy
Policy Priority This section identifies each policy:
• Policy Name – Enter a suitable name. Generally, you should use the "Policy
Name" for network traffic.
• Source Address – Define the source address of packets here. It has two
types, such as, IP address or MAC address. If you select IP address, you can
define the IP address range; otherwise you can define up to four MAC
addresses.
• Destination Address – Define the destination address of packets here. The
explanation is the same as above.
• Protocol Type – The field defines traffic packet type, i.e. ICMP, TCP or AH.
• Source Port – Define the packet source port here.
• Destination Port – Define the packet destination port here.
• Priority Queue – Defines a packet if it meets all conditions defined above. It
will be implemented with some priority level.
Policy List The list will display the details of all Policy Priority configuration data that you
have setup. You can modify it by clicking on a selected row.
Page 66