Edimax Technology 3G-6218n - Manual (Page 13)

12
Method 2: Setting up the router with the web-based UI
If you lose the CD-ROM, you can setup the router with the following steps (web-based user
interface).
2-2 Setting client computers to obtain IP addresses automatically
Before you start configuration procedures, your computer must be able to get an IP address
automatically (set to use dynamic IP addresses). If your computer is set to use a static IP
address, or if you are unsure, please follow the following instructions to configure your
computer to use dynamic IP addresses:
 Windows 95/98/Me
(see section 2-2-1)
 Windows 2000
(see section 2-2-2)
 Windows XP
(see section 2-2-3)
 Windows Vista (see section 2-2-4)