4-4 using “pppoe” as broadband connection type – Edimax Technology 3G-6218n User Manual
Page 33
32
2-4-4 Using “PPPoE” as broadband connection type
1. If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over
Ethernet), select “PPPoE”.
Item Name
Description
User Name
Input the user name assigned by your ISP here.
Password
Input the password assigned by your ISP here.
Service Name
Give this Internet service a name (optional).
MTU
Input the MTU value of your network connection here. If you
do not know, use the default value.
Connection Type
Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selected.
2. Click “OK” to complete setup.