Edimax Technology 3G-6218n - Manual (Page 72)

71
choose any channel number you want to use, and almost all
wireless clients can locate the channel you’re using
automatically without any problem. However, it’s still useful to
remember the channel number you use, some wireless client
supports manual channel number select, and this would help in
certain scenario when there is some radio communication
problem.
Associated Clients Click ‘Show Active Clients’ button to show the list of all
connected wireless clients. You can click ‘Refresh’ in new
window to get latest list again, or click ‘Close’ to close the
window.
Please note that if you have pop-up blocker installed, you
may have to disable it or tell your pop-up blocker to allow the
popup window, or you will not be able to see the wireless
client list window.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
You can click ‘Continue’ to continue on other settings without restart the broadband router,
however, the changes you made will not take effect before you restart the broadband
router.
TIPS: You can try to change channel number to another one if you think the data transfer
rate is too slow, or keep having problem while transferring the file over wireless network.
There could be some other broadband routers using the same channel, which will
disturb the radio communication between wireless client and the broadband router.