Edimax Technology 3G-6218n User Manual
Page 49
48
Note 1: The 3G-6218n supports most 3G/3.5G modem cards. You can simply
connect the modem card to the 3G-6218n and the router will recognize the
modem card automatically. No additional setup procedures are required. However,
some modem cards require a PIN code or account/password. In such cases, you
have to use 3G-6218n’s web interface to setup the connection. Some other modem
cards require you to install a driver on your computer before connecting it to the
3G-6218n. Please refer to the 3G USB modem’s manual for details. If you
experience compatibility problems with certain 3G USB modem cards, please
upgrade the firmware. The latest firmware can be found on the EDIMAX website
(www.edimax.com).
Note 2: A 3G/3.5G connection and an xDSL/cable connection cannot be used at the
same time. When both types are connected to the router, the 3G-6218n will
prioritize the 3G/3.5G connection and will only switch to the xDSL/cable
connection when the 3G/3.5G signal is weak.