Edimax Technology 3G-6218n - Manual (Page 9)

8
Right and left side panel
Item Name Description
LAN/WAN
switch
Switches the RJ-45 port to LAN or WAN mode. Switch to WAN mode if
you want to access the Internet through your xDSL or cable modem.
This cable connection can also act as a backup for your 3G connection.
WPS/Reset
button
Initiates WPS or resets the router to factory defaults (clears all
settings). Press this button and hold for over 10 seconds to restore all
settings to factory defaults, or press this button for less than 5 seconds
to start WPS.
ON/OFF
switch
Switches the router on and off.
DC in
Mini-USB port for the supplied power adapter. If you have a mini-USB
to USB cable, you can also power this 3G router via a computer.
Note: You can power this router via a computer when using a 3G
modem card; but if you get a weak 3G signal while doing so, please
power the router via a power outlet.
RJ-45 port Local/ Wide Area Network (LAN/WAN) port.
RJ-45