Edimax Technology HP-2002APn - Manual (Page 18)

16
7. Wireless Access Point Configuration
7.1 IP Setting
You can configure the HP-2002APn wireless setting by running the Setup
Wizard in the CD-ROM provided in the package. The wizard provides quick
setup for the SSID, wireless security of WPA-PSK and changing password of
HP-2002APn. When you start the Setup Wizard, you will get the following
Welcome screen. Please choose the language to start with and follow the easy
steps in the Wizard. No instruction for the Setup Wizard is given here.
If you lost the CD-ROM or you prefer the traditional web setup, please follow
the procedures in this Manual to configure the HP-2002APn
The default IP address of HP-2002APn is ‘192.168.2.8’.Before you start the
Wizard or start to login HP-2002APn, you should make sure your computer’s
IP address is in the same segment (192.168.2.XXX where XXX=10~253 ) of
HP-2002APn .
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network and Internet
Connections icon, click Network Connections, then double-click Local Area
Connection, Local Area Connection Status window will appear as follows.