Edimax Technology HP-2002APn - Manual (Page 34)

32
Field Description
BG Protection
Mode
You may select On, Off, or Auto. The default BG
protection mode is Auto.
Beacon
Interval
By default, wireless beacon signal sends data to
station every other 100 ms. The range is 20~999.
Data Beacon
Rate (DTIM)
The default DTIM is 1ms. The range is 1~255.
Fragment
Threshold
The default fragment threshold is 2346. The range is
256~2346.
RTS
Threshold
The default RTS threshold is 2347.The range is
1~2347.
TX Power Set the Tx power. 100% indicates full power.
Short
Preamble
Enable or disable short preamble. The default setting
is Disable.
Preamble defines the length of CRC correction block
for wireless devices. Short preamble adopts 56-bit
synchronization field. The network whose network
stream is dense should use shorter preambles.
Short Preamble is mainly applied to improvement the
efficiency of real- time applications, such as streaming
video, and Voice-Over-IP telephony.
Short Slot Enable or disable short slot.
Tx Burst Tx Burst can be used to improve the efficiency of data
transmission. It can make system transmit more data
during a period of time.
Pkt_Aggregate Pkt_Aggregate can aggregate multiple data packets
together for improving the transmission efficiency
Country Code Select a proper country code in the drop down list.
Wi-Fi Multimedia
The parameters of WMM are described as follows:
Field Description
WMM
Capable
Enable or disable WMM. After enabling WMM, AP can
process different types of wireless data according to
their priority levels.
APSD
Capable
Enable or disable APSD. After enabling APSD, it can
decrease the consumption of the power supply device.
DLS
Capable
Enable or disable DLS
WMM
Parameters
Click the WMM Configuration button to display WMM
parameters configuration page.