Edimax Technology HP-2002APn - Manual (Page 24)

22
Field Description
interface. The default setting is Disable.
LAN 2 IP
Address The second IP address of the LAN interface. This IP
address should not collide with the IP address of the
interior network.
LAN 2
Subnet
Mask The subnet mask of the second IP address of the LAN
interface.
MAC
Address Display the current MAC address that LAN interface uses.
DHCP
Type Enable or disable DHCP service. The default setting is
Server, it indicates DHCP service is enabled.
After enabling DHCP service, you can configure the
following parameters of the DHCP server:
Start IP Address: The start IP address of the DHCP
address pool.
End IP Address: The end IP address of the DHCP address
pool.
Subnet Mask: The subnet mask that DHCP server
assigns.
Primary DNS Server: The primary DNS server that DHCP
server assigns.
Secondary DNS Server: The secondary DNS server that
DHCP server assigns.
Default Gateway: The gateway that DHCP server assigns.
Lease Time: The lease time of the IP address.
Statically Assigned: For binding MAC and IP.
802.1d
Spanning
Tree It can provide redundant link and prevent network from
generating loop. You may select Enable or Disable.
LLTD After enabling LLTD (Link Layer Topology Discovery),
Windows Vista automatically discovers other devices’s link
topology, and these devices are also compatible with
LLTD. You may select Enable or Disable.
IGMP
Proxy Enable or disable IGMP Proxy.
IGMP
Snooping Enable or disable IGMP Snooping. After enabling this
function, the packets of the IGMP broadcast will not sent
to the LAN interface that does not belong to that group.
UPNP Enable or disable the UPnP function. After enabling this
function, AP will provide automatic port-mapping for P2P
software on the interior network.