Edimax Technology HP-2002APn - Manual (Page 26)

24
Field Description
Name
(SSID) characters. The legal characters include letter, number
underline or the combination of these characters.
Multiple
SSID1~7 Accessional network SSID. Each SSID can use wireless
security setting independently.
Broadcast
Network
Name
(SSID) Whether to broadcast SSID. After enabling this function,
AP will broadcast its SSID.
AP
Isolation Enable or disable the isolation among AP clients. After
enabling this function, the client terminals that connect to
the same AP can not communicate each other.
MBSSID
AP
Isolation Enable or disable the isolation among different SSIDs.
After enabling this function, the client terminals with
different SSIDs can not communicate each other.
BSSID The MAC address of the wireless interface.
Frequency
(Channel) You may select a proper channel in the drop down list.
The default channel is Channel 6.
Wireless Distribution System (WDS)
WDS modes include Lazy Mode, Bridge Mode, and Repeater Mode. You can
also enable WDS.
1) Lazy Mode
In the lazy mode, AP automatically connects to the WDS devices that use the
same SSID, channel, encryption mode, and the physical mode. You do not
need to manually enter other MAC addresses of peer APs.
The parameters of Lazy Mode are described as follows:
Field Description
WDS
Mode Select the Lazy Mode in the drop down list.
Phy
Mode The physical modes in the drop down list include CCK,
OFDM, HTMIX, and GREENFIELD.
Encryp
Type The encryption types you can select include NONE, WEP,
TKIP, and AES. If selecting WEP, TKIP, or AES, you need
to set the encryption key.
Encryp
Key Set the encryption key.