Edimax Technology IC-9000 User Manual
Page 16
Advertising
16
2-2 Seeing the Video in a Remote Location
After the IC-9000 is installed and you can see the video from the CamView software in the
local network, it’s very easy to see the video in a remote location. All you need to do is add
a camera item in the “CameraList” 16folder of the CamView software, key in the ID and
Password of the IC-9000 (from the ID/Password card). And then double click this camera
item. You will then see the Camera video immediately. No further NAT/router setting
modifications are needed.
Advertising