Edimax Technology IC-9000 - Manual (Page 18)

18
3-1 Information
The first page of the web configuration of the IP CAM is the information page. You can see
the model name/firmware version, IP CAM ID, registration status, network type and current
video settings (bandwidth & resolution) in this page.
The IP CAM can be viewed remotely by the CamView software only when the IP CAM is
registered. If this IP CAM is not registered, please check the Ethernet wiring of your
network environment. The “Network type” 18field displays the network connection (wired or
wireless) and method (DHCP, PPPoE or static ip) the IP CAM is running. The “Video users”
18field displays the number of connected video viewing users.