Edimax Technology IC-9000 - Manual (Page 28)

28
email message. The SMTP server and username/password account are only for
transfer the email message to the “Email recipient”, the “Email recipient” could be on
another email server or any reachable email address. The username and password
fields could be left empty if no authentication is needed for the SMTP server.
7. SMTP server test – after the settings are filled, you could press “SMTP server test” to
check if all the settings are correct.
8. Send FTP message – if this item is enabled, the IP CAM will send out a jpeg picture file
to the specified ftp account.
9. FTP server – this is the FTP server address to receive the jpeg file.
10. FTP username/password – this is the username/password to login into the FTP server,
so, this triggered jpeg file will be allowed to reach this FTP server.
11. Remote folder – the jpeg file will be put under this folder of the FTP server.
When this modification is “Save&Apply”ed, it works immediately, but all the connected
video viewing users will be disconnected.
The default setting is “Disable”.