Edimax Technology IC-9000 - Manual (Page 22)

22
3-4 Advanced Network
In some special situation, your network environment only provides PPPoE connection
(ADSL service), there is no NAT/router available. You will then need to set the PPPoE
settings in the “Advanced Network”22page. Only the PPPoE username and password are
needed to let PPPoE work. After the ”Save&Apply” button is pressed, the PPPoE function
will work immediately. You can check the ”Registration status” in the “Information” page to
see if the IP CAM is registered using the PPPoE connection.
Please be noticed that the DHCP or static IP settings in the “Network”22page can work
together with the PPPoE connection. Only that the PPPoE has higher priority, so, if the
PPPoE is working, the IP CAM will use PPPoE to connect to the Internet.
The default setting is ”Disable PPPoE”.