General safety precautions – Husqvarna 122LD User Manual

Page 8

Advertising
background image

GENERAL SAFETY PRECAUTIONS

8 – English

If the cutting attachment rotates with the throttle in the idle
position then the carburettor idle setting must be checked.
See instructions under the heading Maintenance.

Stop switch

Use the stop switch to switch off the engine.

Start the engine and make sure the engine stops when
you move the stop switch to the stop setting.

Cutting attachment guard

This guard is intended to prevent loose objects from being
thrown towards the operator. The guard also protects the
operator from accidental contact with the cutting
attachment.

Check that the guard is undamaged and not cracked.
Replace the guard if it has been exposed to impact or is
cracked.

Always use the recommended guard for the cutting
attachment you are using. See chapter on Technical data.

Muffler

The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user. A muffler
fitted with a catalytic converter is also designed to reduce
harmful exhaust gases.

In countries that have a warm and dry climate there is a
significant risk of fire. We therefore fit certain mufflers with
a spark arrestor mesh. Check whether the muffler on your
machine is fitted with this kind of mesh.

For mufflers it is very important that you follow the
instructions on checking, maintaining and servicing your
machine.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to
the machine.

If the muffler on your machine is fitted with a spark
arrestor mesh this must be cleaned regularly. A blocked
mesh will cause the engine to overheat and may lead to
serious damage.

!

WARNING! Never use a cutting
attachment without an approved guard.
See the chapter on Technical data. If an
incorrect or faulty guard is fitted this can
cause serious personal injury.

!

WARNING! Mufflers fitted with catalytic
converters get very hot during use and
remain so for some time after stopping.
This also applies at idle speed. Contact
can result in burns to the skin.
Remember the risk of fire!

Advertising