Key (9), Other functions, The navi light system – Hama ROC4505 User Manual

Page 10

Advertising
background image

7. Select the device allocated to the play keys

.

Press once on one of these keys (8) then once on

the mode key (

TV

,

DVD

,

VCR

, …).The key goes out

then relights.
8. Select the device allocated to the navigation

keys ,

MENU

,

EXIT

,

OK

.

Press once on one of the navigation keys (5) then

once on a mode key (

TV

,

DVD

,

VCR

, …).The key

goes out then relights.
9. End of the programming

Press once on the

HOME CINEMA

key.The mode

key goes out. The programming of the

HOME

CINEMA

key is finished.

How to delete the programming of

the

HOME CINEMA

key?

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit.

2. Release the

SETUP

key.

3. Press once on the

HOME CINEMA

key. The

key goes out then relights.

4. Press once on the

SETUP

key. The

HOME

CINEMA

key has now been deprogrammed.

Notes:

• During the programming of the

HOME CINEMA

, key,

any action on the

FAV

,

MACRO

keys, or mode keys

(

TV

,

DVD

, …) halts the procedure.

• The default input mode is TV mode.
• The group keys can be programmed in any order.
• The remote control remains in programming mode

as long as the

HOME CINEMA

key is not pressed

again.

• The

HOME CINEMA

key cannot be included in a

Macro or selected as favourite (FAV).

The

FAV

key (9)

This key allows you to memorise two of your

favourite channels. Access to one or the other

channel is toggled by pressing the

FAV

key.

How to program the

FAV

key?

1 Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit.

2. Release the

SETUP

key.

3. Press once on the

FAV

key.The key goes out

then relights.

4. Press a mode key (

TV

,

VCR

,…) then enter the

number of your first favourite channel. The

key goes out then relights.

5. Press once on the

FAV

key.The key goes out

then relights.

6. Press a mode key (

TV

,

VCR

, …) then enter

the number of your second favourite channel.

The key goes out then relights.

7. Press once on the

FAV

key.The key goes out.

The

PIP

key

This key operates like this key on your original

remote control.

Other functions

Placing all devices on standby
Press the

key twice in less than one second,

keeping it held down the second time. All the

devices go on standby one after the other.

Adjustment of ALL volume controls

under a specific mode

You can allocate the volume control to one of the

modes of the remote control on condition that the

volume control exists on the corresponding device

(e.g. control of TV sound in TV mode, or VCR, …).

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains lit.

2. Release the

SETUP

key.

3. Press the

key until the mode key blinks

once.

4. Press once on the mode key (

TV

,

VCR

, …)

corresponding to the device whose volume

will always be controlled by the

VOL

and

keys.

5. Press the

key once.

Adjustment of the volume controls

for EACH mode.

You can decide that the volume control is func-

tional for each mode selected on condition that

the volume control exists on the corresponding

device (e.g. control of the television set sound in

TV mode, the control of the sound of the SAT

receiver in SAT mode, …).

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains lit.

2. Release the

SETUP

key.

3. Press the

key until the mode key blinks

once.

4. Press once on the mode key (

TV

,

VCR

,…) cor-

responding to the device whose volume will

always be controlled by the

VOL

and keys.

5. Press the

VOL

key once.

6. Press the

key once.

The NAVILIGHT system

The THOMSON NAVILIGHT system allows

you easy access to the settings of your television

(TV) or video recorder (VCR) including this fea-

ture.

1. Switch on the set you want to control.

2. Press the key corresponding to the type of

set you want to use (

TV

,

VCR

, or

SAT

). In the

VCR position, make sure that the AV mode is

activated for the TV set (the SCART socket

must be selected).

3. Press key

MENU

once.

4. Navigate through the setting menus with the

play keys

.

5. Validate with

OK

.

6. To leave the menus, press key

EXIT

once.

6

ROC 4505 / EN - bj - PB / epheme - rst / 11-2006

ROC4505_en 3/11/06 16:18 Page 6

Advertising