Home cinema – Hama ROC4505 User Manual

Page 9

Advertising

5. If the problem persists and always with the same

key, check that the original remote control is

actually operating: is it sending IR signals? (check

batteries; is it correctly aligned in relation to the

diode on your ROC 4505?

Note 2:

• You cannot copy keys to the

LEARN

BACKLIGHT

SETUP

MACRO

FAV

HOME CINEMA

keys.

• All the keys copied to a mode will be deleted if a 4

figure code is entered for this mode (and likewise for

direct entry of a code, search of a code or make).

Identifying the position of the diode

on the original remote control (keys

to copy)

If the LED of the original remote control is not

visible (for example, if hidden behind a dark plas-

tic plate), the instructions below will help you to

locate it precisely.

1. Place the front of the original remote control

(the part you point at the device to control)

around 2.5 cm from the LED of your ROC

4505 opposite

LEARN

(see LEARNING dia-

gram at beginning of instructions).

2. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit.

3. Release the

SETUP

key.

4. Press once on a mode key (

DVD

VCR

,…).

The key goes out and then relights.

5. Press once on the

LEARN

key.

6. Hold down one of the keys on the original

remote control while moving the remote

control from left to right. As soon as the 2

remote controls are correctly aligned, the

mode key blinks rapidly.

7. To copy the key functions from your original

remote control into your ROC 4505, go to

step 5 of “To copy keys”.

Note: Some original remote controls don’t transmit conti-

nuous IR signals when a key is held down. If this is the

case, press several times on one of the keys while moving

the remote control from left to right.

To copy keys

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit.

2. Release the

SETUP

key.

3. Press once on the mode key (

DVD

VCR

…).The key goes out then relights.

4. Press the

LEARN

key once.

5. Press once on the key of your ROC 4505

to which you want to copy one of the keys of

your original remote control.

6. Hold down the key of the original remote

control you wish to copy until the mode key

goes out and then relights (2 to 3 seconds).

In case of problems, the mode key will blink

for 3 seconds but will remain in learning

mode.Try again or try another key.

7. For the other keys, repeat the procedure

from step 5 onwards.

Press the

SETUP

key once when all the desired

keys have been copied.The mode key goes out.

To delete all keys copied under a

mode

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit

2. Release the

SETUP

key.

3. Press once on a mode key (

DVD

VCR

,…).

The key goes out then relights.

4. Press twice on the

LEARN

. key.The key goes

out then relights.

5. Press once on the

SETUP

key.The mode key

goes out.All the keys copied under this mode

are deleted.

The

HOME CINEMA

key

The Home Cinema mode is a mode in which cer-

tain keys of the remote control are dedicated to

those devices that you select.This becomes pos-

sible after allocating a mode key (

DVD

, …) to

a group of keys previously dedicated to this

mode. For example, the play keys (8) can be allo-

cated to a video cassette recorder, a DVD player,

a cassette player, hifi system, etc. It is up to you to

choose which device you will allocate to this

group of keys.You need to do the same for the

other groups of keys.

The groups of keys are:

All the keys except the

PROG

VOL

and

keys, as

well as the play keys (8) plus the navigation keys (5).

• the

PROG

key

• the

VOL

and keys

(4)

• play keys

• the navigation keys

MENU

EXIT

How to program the

HOME CINEMA

key?

1. Hold down the

SETUP

key until the key cor-

responding to the last selected mode remains

lit.

2. Release the

SETUP

key.

3. Press once on the

HOME CINEMA

key. The

mode key goes out then relights.

4. Select the device allocated to the number

keys (1 to 9).

Press once on a numbered key then once on a

mode key (

DVD

VCR

, …). The key goes out

then relights.
5. Select the device allocated to the

PROG

key

(channel changes).

Press once on the

PROG

key then once on a

mode key (

DVD

VCR

, …). The key goes out

then relights.
6. Select the device allocated to the

VOL

and

keys.

Press once on the

VOL

(4) keys then once

on the mode key (

DVD

VCR

, …).The key goes

out then relights.

ROC4505_en 3/11/06 16:18 Page 5

Advertising

Popular Brands

Popular manuals