Yamaha PSR-520 - Manual (Page 60)

59 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The Multi Pads
7
Play the Multi Pads
.................................................................................................................................
Tap any of the MULTI PADS. Your recorded data will be played in ex-
actly the same way as the preset data.
● Enter a New Name for the Multi Pad Kit
If you want to enter a descriptive name for the user pad kit numbered 22
through 25, enter your original Multi Pad Kit name, this is recommended.
Use the cursor [>] button to move the cursor to the first (left most) char-
acter of the Multi Pad Kit name in the display. A Multi Pad Kit name can
consist of up to 8 characters. The position of the character you want to enter
or change can be selected by moving the cursor.
Using the [–/NO] and [+/YES] buttons or the data dial, enter the desired
character listed below. The number buttons can also be used to enter the
number. If you want to insert an underline character at the cursor position,
press the cursor [▲] button. If you want to delete a character at the cursor
position, press the cursor [▼] button. When you’ve finished entering the
Multi Pad Kit name, move the cursor to the position other than the Multi
Pad Kit name so that the newly entered Multi Pad Kit name will be memo-
rized.
Character List
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789–
Yamaha 1 22
• The user pad kit data including
it’s name is retained in memory
even when the power switch is
turned OFF, as long as the bat-
teries are installed or the AC
adaptor is connected..