Tanita KP-601 - Manual (Page 5)

3
BEFORE USE
When using with batteries
1. Open the battery cover.
2. Remove the battery cover and insert 4 size AA (LR6) batteries.
3. Replace the battery cover.
When using with AC adaptor
1. Do not use any AC adaptor except those with the following specifi cation.
* Only use an AC adaptor with a CE marking
2. To use AC adaptor, put the DC jack into the inlet.
◆
◆
Check the level to make sure that the scale is horizontal.
◆
Adjust with the
adjustable feet.
Adjust so that the
bubble is the center
circle.
How to remove and attach the cover
◆
[How to remove]
Push the hinge to
one side.
Twist and pull it up.
[How to attach]
Insert one side of
hinge.
Twist and pull it
down.
Note: Make sure all 4 feet make contact with surface.
1 2 3 4
1 2 1 2