Tanita KP-601 - Manual (Page 6)

4
CALIBRATING
Use the provided 100 g test weight.
Turn the power on. Press the open
button to open the
cover.
The weighting unit
that was used when
the power was
turned off last time
will be displayed.
Default is g.
Set the Gem cup.
Calibration is
complete. Calibration
is not complete when
not showing
.
Make sure the stable
mark is displayed.
Press CAL. Remove the test
weight.
When blinks,
place the test weight
gently onto the gem
cup.
WEIGHING
Press OFF. Place the object. Remove it.
1 2 3 4
5 6 7 8
2 3 4
: Overload. The object being weighed exceeds the maximum capacity.
When the scale is on
1
or : See TROUBLE SHOOTING