Programming backlit brightness, Batteries replacement, Trouble shooting – Tanita KP-601 User Manual

Page 9

Advertising
background image

7

PROGRAMMING BACKLIT BRIGHTNESS

Press CAL to display

.

When the power

is off

Press MODE to

confi rm.

While pressing

MODE press

ON/OFF.

3

4

2

1

0

When you have

made your selection,

press MODE to

confi rm.

The numeric values

are displayed.

Setting is fi nished.

Press the TARE to

cycle through the

backlit options.

BATTERIES REPLACEMENT

When batteries are running low,

is displayed. When batteries are running out,

is

displayed and the power is automatically turned off.
Immediately replace with new batteries (all 4 batteries). Do not apply excessive force to the
measuring section when replacing batteries.

Default setting is “2”.

1

2

3

4

5

6

7

8

TROUBLE SHOOTING

• The power doesn’t turn on.

Insert new 4 size AA (LR6) batteries. Be sure that the polarity of the batteries is set properly.

or

appears on the display.

The scale needs to be repaired. Please contact your retailer.

appears on the display.

Place the test weight AFTER

blinks.

If it doesn't work, the scale needs to be repaired. Please contact your retailer.

appears on the display.

Place the gem cup BEFORE

blinks and do not remove it until calibration is complete.

If it doesn't work, the scale needs to be repaired. Please contact your retailer.

Advertising