HONDA 2008 CR-V - Manual (Page 131)

Turn this dial to increase or decrease
the fan speed and airflow.
Turning this dial clockwise increases
the temperature of the airflow.
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
This button turns the air
conditioning on and off. The
indicator in the button is on when
the A/C is on.
The system automatically
turns on the A/C and switches to
recirculation mode. Air flows from
the center and side vents in the
dashboard. Pressing the
, A/C,
or any of the mode buttons cancels
MAX A/C.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the center
and corner vents in the dashboard.
Use the mode control buttons to
select the vents air flows from. Some
air will flow from the dashboard
corner vents in all modes.
This button turns the rear window
defogger off and on (see page
).
Pushing this button also turns the
power mirror heaters on and off.
77
/
CONTINUED
Canadian models only
Vents, Heating, and A/C
Fan Control Dial
Temperature Control Dial
Air Conditioning (A/C) Button
Recirculation Button
MAX A/C Button
Mode Control
Rear Window Def ogger
Button
Fe
a
tu
re
s
127
2008 CR- V
Table Of Contents Main Menu