Installing a child seat, 2008 cr- v – HONDA 2008 CR-V User Manual

Page 49

Advertising
background image

Follow step 1 through 5 as
described previously to secure the
child seat.

Pull down the cover to access the
tether anchor.

Route the tether strap over the
seat-back, then attach the tether
strap hook to the tether anchor in
the ceiling, making sure the strap
is not twisted. Tighten the strap
according to the seat maker’s
instructions.

To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.

Route the tether strap over the
seat-back, then attach the tether
strap hook to the anchor, making
sure the tether strap is not twisted.

Tighten the strap according to the
seat maker’s instructions.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

Reinstall the dual deck cargo shelf.

1.

2.

3.

4.

7.

8.

9.

10.

Using the Center LATCH

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

e

ty

45

TETHER STRAP HOOK

TETHER
ANCHOR

TETHER STRAP HOOK

TETHER ANCHOR

CENTER LOWER ANCHORS

COVER

TETHER ANCHOR

2008 CR- V

Table Of Contents

Main Menu

Advertising
This manual is related to the following products: