Jump starting, 2008 cr- v – HONDA 2008 CR-V User Manual

Page 325

Advertising
background image

If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.

Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.

Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.

Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.

Connect the second jumper cable
to the negative (

) terminal on

the booster battery. Connect the
other end to the stud bolt on the
engine side as shown. Do not
connect this jumper cable to any
other part of the engine.

6.

7.

5.

4.

Jump Starting

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

321

2008 CR- V

Table Of Contents

Main Menu

Advertising
This manual is related to the following products: